A water heater is a crucial appliance that provides hot water for various household needs, including bathing, cooking, and cleaning. While water heaters are generally reliable, they can develop problems from time to time. Being aware of the issues can make it easier to identify the problem. Therefore, it is crucial to understand and identify the issues so that you can communicate effectively with the experts offering water heater repair in Smithfield in case of major problems.
Top Advice For Common Water Heater Problems
Troubleshooting common water heater problems can be straightforward if you know what to look for. Whether you are experiencing issues with insufficient hot water or any other similar problem, here we have compiled a list of advice to help you. However, if you are still trying to figure out how to proceed or feel uncomfortable working on your water heater, it’s always best to call our best plumbing company, Smithfield. With their expertise and experience, they can quickly diagnose and repair any issue.
1. Insufficient Hot Water
Your water heater is not producing enough hot water; there could be several causes. The first thing to check is the temperature setting on the thermostat. If it is set too low, adjust it to a higher temperature. If the temperature setting is already high, the problem could be due to sediment buildup in the tank. Over time, minerals and other debris can accumulate in the tank and reduce the amount of available hot water. To address this issue, you may need to flush the tank.
If you notice water pooling around the base of your water heater or dripping from the unit, it may be due to a leak. Check the inlet, outlet connections, and pressure relief valve, for signs of leaks or corrosion. Tighten any loose connections, and if the leak persists, consider water heater repair to diagnose and resolve all the issues.
3. Unusual Noises
Unusual noises can happen due to sediment buildup in the tank. The noise is caused by the water heating up and expanding the sediment, which then pops and crackles as it settles. To address this issue, you may need to flush the tank. Still, if you hear a high-pitched whining noise, it could be due to a faulty heating element. In this case, the faulty element will need to be replaced immediately.
4. Disturbed Functionality
When you notice the water heater is not producing hot water, the problem could be due to numerous factors. Gas-powered water heaters use a pilot light to ignite the burner and heat the water. If the pilot light is out, the burner will not ignite, and no hot water will be produced. To relight the pilot light, follow your owner’s manual instructions or call water heater repair to do it for you.
5. Discolored Or Smelly Water
When you observe hot water’s strange odor or color, it may be due to bacterial growth in the tank. It can happen when the water temperature is too low or the tank has yet to be flushed regularly. To address this issue, you can try flushing the tank and adding chlorine bleach to kill the bacteria. To do this, turn off the power or gas supply to the water heater, shut off the water supply to the tank, and drain the tank.
In case the problem persists, you should get it replaced with an anode rod, which is a component that helps prevent corrosion in the tank, or have our professional plumber install a new tank.
Get A New Water Heater Installed Today With Us!
APEX Plumbing is here with professionally trained plumbers who can help you keep your plumbing system up to date. With us, you can get rid of plumbing issues and have a new and reliable water heater installed at affordable prices. So, if you are looking for a drainage plumber logan and want to get the heater installation done, connect with us, or visit our website to know more about our services!